The clock Part Store's Parts Index
Chapter Three: The Striking Mechanism
F0281 LONGCASE BELL STAND & NUT
0281 000115 LONGCASE BELL STAND & NUT 5inch overall length. 3inch steel shaft. Brass nut.
F0266 LONGCASE GATHERING PALLETS Two types exist. The type is dependant on the rack design. Check if the pin on the rack that the pallet locks onto is on the FRONT or REAR of the rack - Casting Only - Filing and drilling needed.
0266 100115 LONGCASE GATHERING PALLET FORGING, FRONT The tail of the front (left) pallet locks in front of the rack. This is a blank ready for finishing with no hole placed.
0267 100115 LONGCASE GATHERING PALLET FORGING, REAR The tail of the rear (right) pallet locks to the rear of the rack. This is a blank ready for finishing with no hole placed.
F0282 LONGCASE BELL HAMMER
0282 000115 LONGCASE BELL HAMMER Steel. 85mm from hole to centre of hammer head.
F0268 LONGCASE RACK PARTS
0268 000115 LONGCASE RACK SPRING
0269 000115 LONGCASE RACK BLANK Steel. Teeth are pre-cut. Width 54mm. Total length including tail 79mm. Tips of teeth are 2.8mm apart. Thickness 1mm. No holes drilled. Locking pin not included.
0269 000215 LONGCASE RACK COMPLETE A pre-cut and assembled rack that saves all the work involved with an ordinary rack blank. Made from 1mm thick steel with brass pipe and lever. Locking pin fitted plus stud. Distance from pipe centre to the tips of teeth is 60mm.
F0466 LONGCASE & FUSEE FLY BLANK
0466 000115 LONGCASE & FUSEE FLY BLANK Brass, ready for finishing. 42mm x 29mm.
0466 000215 LONGCASE & FUSEE FLY BLANK Brass, ready for finishing. 38mm x 26mm.
F0283 LONGCASE BELL HAMMER SPRING
0283 000115 LONGCASE BELL HAMMER SPRING Complete with screw.
F0304 FRENCH GONG HAMMER ASSEMBLY
0304 000115 FRENCH GONG HAMMER ASSEMBLY Brass. Also suits most mass-produced German clocks. 60mm long.
F0481 FRENCH CLOCK BELL STAND & NUT
0481 000115 FRENCH CLOCK BELL STAND & NUT Brass
F0302 FRENCH CLOCK BELL NUT
0302 000115 FRENCH CLOCK BELL NUT Outer edge knurlled. No thread. Ready for tapping.
F0303 FRENCH BELL HAMMER
0303 000115 FRENCH BELL HAMMER All brass construction
F0280 CAST CLOCK BELL High quality. Shotblast.
0280 031215 CAST CLOCK BELL Diameter: 3 1/2inch / 89mm, height 1 3/8inch / 35mm (approx).
0280 043815 CAST CLOCK BELL Diameter: 4 1/2inch / 114mm, height 1 3/8inch / 35mm (approx).
0280 051215 CAST CLOCK BELL Diameter: 5 1/2inch / 140mm, height 1 3/8inch / 35mm (approx).
F0301 CAST CLOCK BELL silvered Polished and silver plated. For French clocks.
0301 015015 CAST CLOCK BELL Diameter: 1 1/2inch / 38mm, height: 1/2inch / 12mm (approx).
0301 020015 CAST CLOCK BELL Diameter: 2inch / 50mm, height: 5/8inch / 15mm (approx).
0301 022515 CAST CLOCK BELL Diameter: 2 1/4inch / 57mm, height: 11/16inch / 17mm (approx).
0301 025015 CAST CLOCK BELL Diameter: 2 1/2inch / 65mm, height: 3/4inch / 20mm (approx).
F0414 PRESSED BRASS BELLS An economic alternative to cast bells. We try to obtain bells as described but from time to time the sizes may vary slightly.
0414 004515 PRESSED BRASS BELL 44mm / 1 3/4inch
0414 005515 PRESSED BRASS BELL 51mm / 2inch
0414 006015 PRESSED BRASS BELL 60mm / 2 1/4inch
0414 006515 PRESSED BRASS BELL 65mm / 2 1/2inch
0414 007015 PRESSED BRASS BELL 70mm / 2 3/4inch
0414 008015 PRESSED BRONZE BELL, Diameter 85mm / 3 5/8inch, Height 35mm
0414 050015 PRESSED ECONOMY BRASS BELL, Diameter 124mm / 4 7/8inch
0414 010015 PRESSED BRONZE BELL, Diameter 100mm / 4inch
0414 012515 PRESSED STEEL BELL 120mm High dome for Comtoise etc. 120mm diameter. 47mm high.
F1098 CAST BELL FOR COMTOISE High quality bells, cast from bell metal. Smooth but not polished, just like the originals. Superb sound. Height 45mm.
1098 012015 CAST BELL 120mm COMTOISE
1098 014015 CAST BELL 140mm COMTOISE
F1455 ECONOMY CAST CLOCK BELLS Cast from brass, not bell metal.
1455 017515 CAST CLOCK BELL 1 3/4inch (45mm) diameter approx. Centre hole not drilled. Height 17mm
1455 020015 CAST CLOCK BELL 2inch (50mm) diameter approx. Centre hole not drilled. Height 14mm.
1455 022515 CAST CLOCK BELL 2 1/8inch (55mm) diameter approx. Centre hole not drilled. Height 18mm.
1455 025015 CAST CLOCK BELL 2 1/4inch (60mm) diameter approx. Centre hole not drilled. Height 18mm
1455 050015 CAST CLOCK BELL 5inch (115mm) diameter approx. Centre hole not drilled. Height 40mm.
F0590 ALARM PARTS
0590 000215 ALARM MECHANISM FOR AMERICAN CLOCKS An accurate copy of the original, supplied complete with hammer and dial centre piece. Alarm trip wire and bell are not included.
0590 000115 ALARM CENTREPIECE ONLY For American clocks.
F0566 CUCKOO CLOCK BELLOWS, SIDE OPENING Sold in pairs. Box height is the box only and does not include the bellows.
0566 006515 CUCKOO CLOCK BELLOWS 65mm, SIDE OPENING Sold in pairs. Bellows 28mm x 38mm
0566 007015 CUCKOO CLOCK BELLOWS 70mm, SIDE OPENING Sold in pairs. Bellows 28mm x 45mm
0566 008015 CUCKOO CLOCK BELLOWS 80mm, SIDE OPENING Sold in pairs. Bellows 33mm x 44mm
0566 010015 CUCKOO CLOCK BELLOWS 100mm, SIDE OPENING Sold in pairs. Bellows 34mm x 52mm
0566 012015 CUCKOO CLOCK BELLOWS 120mm, SIDE OPENING Sold in pairs. Bellows 34mm x 52mm
0566 014015 CUCKOO CLOCK BELLOWS 140mm, SIDE OPENING Sold in pairs. Bellows 40mm x 62mm
0566 015015 CUCKOO CLOCK BELLOWS 150mm, SIDE OPENING Sold in pairs. Bellows 40mm x 62mm
0566 016015 CUCKOO CLOCK BELLOWS 160mm, SIDE OPENING Sold in pairs. Bellows 40mm x 62mm
F0685 CUCKOO CLOCK BELLOWS, HORIZONTAL OPENING
0685 006515 CUCKOO CLOCK BELLOWS HORIZONTAL 65mm Sold in pairs. Box height is the box only and does not include the bellows.
F0783 CUCKOO CLOCK BELLOWS, QUAIL.
0783 005515 CUCKOO CLOCK BELLOWS, QUAIL 55mm. Sold singly. Rear opening.
F0610 CUCKOO BIRDS
0610 007815 CUCKOO BIRD, PLASTIC Plastic body with moving bill. Painted wings. 78mm long. Metal foot & clamp screw. Multi-coloured.
0610 208015 HIGH QUALITY CARVED WOODEN CUCKOO BIRD Chest, head and feet & tail hand painted. Attaches via metal undercarriage, two 2mm holes and two 3mm holes with fastening screw. 80mm long, 11mm wide, 20mm high inc. perch.
0610 208715 CUCKOO BIRD, WOODEN Wooden bird for cuckoo clocks. Coloured bill, but rest of bird needs painting to suit. Fixed wings. 20mm high, 87mm long.
F0994 CUCKOO CLOCK BELLOWS, REAR OPENING Sold in pairs. Box height is the box only and does not include the bellows.
0994 007015 CUCKOO CLOCK BELLOWS 70mm, REAR OPENING Sold in pairs.
0994 008015 CUCKOO CLOCK BELLOWS 80mm, REAR OPENING Sold in pairs.
0994 010015 CUCKOO CLOCK BELLOWS 100mm, REAR OPENING Sold in pairs.
0994 012015 CUCKOO CLOCK BELLOWS 120mm, REAR OPENING Sold in pairs.
0994 014015 CUCKOO CLOCK BELLOWS 140mm, REAR OPENING Sold in pairs.
0994 015015 CUCKOO CLOCK BELLOWS 150mm, REAR OPENING Sold in pairs.
0994 016015 CUCKOO CLOCK BELLOWS 160mm, REAR OPENING Sold in pairs.
F0782 BELLOWS REPAIR KITS
0782 000115 BELLOWS REPAIR KIT Contains bellows material and full instructions. Sufficient for several clocks.
0985 000115 BELLOWS LEATHER Delicate leather for repairing original cuckoo bellows. Because it is a natural product and hard to cut so thinly, we cannot specify the skin size. It will be more than enough for one normal clock.
1083 000115 SYNTHETIC BELLOWS MATERIAL Enough for several clocks.
0953 000115 CUCKOO BELLOW WIRES Assortment of 4 lifters, ring hooks, bellow, door, hinge & locking wires. 8 Door cramps.
F1070 COILED WIRE SPRING ASSORTMENT
1070 001015 SPRING ASSORTMENT 9 PIECES Coiled wire springs.
1070 010015 SPRING ASSORTMENT 100 PIECES Coiled wire springs.
F0240A SEMI-HARD BRASS WIRES
0240 000315 SEMI-HARD BRASS WIRE For return springs on American movements and for retaining glass barometer wheel tubes in place. 3 metre length. 0.4mm.
F0519 GONG BASE & STAND
0519 000215 SPIRAL GONG & STAND Base 100mm x 65mm. Gong 140mm diameter.
1426 006015 MINI GONG & FITTINGS FOR C/CLOCK
0519 000115 GONG BASE & STAND With 3 1/2inch wire gong. 5 1/2inch high.
F0243A ROUND WIRE GONG & BRACKET
0243 000115 CIRCULAR GONG AND BRACKET 4 1/2inch round wire gong, with backboard mounting bracket.
F0244 CIRCULAR GONG AND BUSH
0244 000115 CIRCULAR GONG AND BUSH 2 3/4inch flat gong with integral mounting bush.
F0243 CIRCULAR GONG Round wire, suitable for Cuckoo and American clocks.
0243 008015 CIRCULAR GONG 80mm Round wire gong.
0243 010015 CIRCULAR GONG 100mm Round wire gong.
0243 012015 CIRCULAR GONG 120mm Round wire gong.
0243 014015 CIRCULAR GONG 140mm Round wire gong.
0243 015015 CIRCULAR GONG 150mm Round wire gong.
F0366 GONG HAMMER HEADS For French mass-produced mantel clocks.
0366 000215 GONG HAMMER HEADS Pack of 5, with plastic insert.
0366 000515 GONG HAMMER HEADS For French and mass-produced mantel clocks. Packs of 5.
F0902 CAST IRON GONG BASES Tuned set of gongs fitted to a cast base. For Westminster chimes.
0902 502515 CAST IRON GONGS, 5 UNDERSLUNG Set of 5 underslung gongs. Longest 250mm.
0902 502715 CAST IRON GONGS, 5 UNDERSLUNG Set of 5 underslung gongs. Longest 270mm.
0903 502515 CAST IRON GONGS, 5 HAMMERBACK Set of 5 hammerback gongs. Longest 250mm.
0904 845015 CAST IRON GONGS, 8 VERTICAL Set of 8 vertical rods. Longest 450mm
0904 868015 CAST IRON GONGS, 8 VERTICAL Set of 8 vertical rods. Longest 680mm
F0242 CAST IRON GONG BASE
0242 000115 CAST IRON GONG BASE For fixing to the backboard of American and German clocks. 2inch x 2 1/2inch x 3/4inch.
F0387 GONG RODS
0387 000415 GONG RODS, TUNED SET OF 4 Bronze. Longest rod 250mm total length including screw.
0387 000515 GONG RODS, TUNED SET OF 5 Bronze. Longest rod 9inch
0387 000815 GONG RODS, TUNED SET OF 8 Steel. 4 gongs tuned for Westminister and 4 tuned for the hour. Longest rod 27inch.
0387 001415 GONG ROD, LOOSE 13 1/2inch 2.8mm. Bronze 13 1/2inch / 342mm long. Sold singly
0387 026515 GONG ROD, LOOSE 26 1/2inch 3.6mm Steel 26 1/2inch long Sold singly
F1459 LONGCASE STUDS Turned from solid 6mm steel. Threaded with 3BA. All sizes have 22mm long usable shaft.
1459 000115 MINUTE WHEEL STUD Shaft diameter 2.4mm. Shoulder depth 2.4mm.
1459 000215 RACK HOOK & LIFTING PIECE STUD Shaft diameter 3.1mm. Shoulder depth 4.0mm.
1459 000315 RACK STUD Shaft diameter 3.1mm. Shoulder depth 4.8mm.